I started on the Grassy Creek Mystery quilt yesterday. The first clue was for gray and gold HSTs. Luckily, I have an Accuquilt die in just the right size. I cut the all triangles in about an hour and a half. Sewed them together a bit later in the day, and ironed them after dinner. I didn’t have to trim them, as they all turned out perfect (lol).

I tried to get the Good Times quilt on to the frame, but the puppy was helping too much. I was able to get the backing pinned on, but then the puppy discovered the pile of batting pieces. Playing “chase me” ended the quilt prepping. Today is another day.

I’m itching to start another project. I found four more Gingiber animal prints, while shopping the stash for the GCMQ. I really like the Thicket quilt, and would like to make another. Although, I did just purchase a quilt kit that will be here next week. It is called Reflected Harmony by Kaye England.

I think its a pretty pink quilt, and it is Accuquilt friendly. I also have the other pink quilt, the Panama Star quilt kit, that I got for Connecting threads. Perhaps 2021 will be the year of the pink quilts?

I have to confess that I did a little Black Friday shopping yesterday, at Accuquilt. They had a buy one get one half off sale. I got two 8 inch Block on Board dies, Winding Ways and Snail Trail. What I like about these two dies is that they accommodate a ten inch square of fabric. This makes for very little sub-cutting of fabric before running it through the cutter. The dies are constructed so that the pieces are all together. Some of the larger Block on Board dies aren’t like that, the pieces are spread out, so in order not to waste a lot fabric, you have to sub cut the fabric to cover the blades of the pieces on the die. It probably has to do with the grain of the fabric, the manufacture of the dies and curves and such. Looking back through this post, it seems like an endorsement for Accuquilt cutters, it’s not meant to be, (no links) I just enjoy using it when I can. I managed not to buy any more fabric or yarn yesterday though. Yay Me!

Be Kind

I started this months Halloween figs bom blocks the other day. The pieced block, (I think its called a tornado block) went together fairly quickly.

The appliqué blocks will take a bit more time. I got them prepped for back basting by tracing the design on the back side of the fabric. I started to use the Uniball gold pen, but went with a #2 pencil instead. The background fabric was a bit too light to hide the gold color. The black bias strips will cover it, but I was concerned that it might show through the orange pieces of the tulips. These should hold me over until Friday and the release of the first Grassy Creek clue.

• 

• 

Grassy Creek is the name of this years Bonnie Hunter mystery quilt. Six or more weeks of cutting and piecing scraps, wondering if it will all look good in the end. I’m playing with the idea of doing this one half size, not a smaller number of blocks, but ½ the measured size of the pieces. I did this with the Provence quilt, and I really like that it is a wall hanging, and not another bed size quilt. There have been hints of string piecing involved with the GC quilt, but its optional. After doing the Appalachian Autumn strings, I may just go the non-string route. I also want to do the Emerald city quilt, which I was going to do (start) at a retreat earlier this year. I have a bunch of green fabrics I want to use. It’ll be on my 2021 to do list.

I got the ‘Meeting of the Geese’ quilt quilted. I chose a very simple panto called Celtic wave, and it took about 2 hours to get this top done. I want to see if there is enough backing left on the frame to do the rock pool quilt. I need to measure it though, as I only have about 40 inches left. The width isn’t a problem as it is 108 wide.

I measured and the remaining backing was about 6 inches too narrow. I took ‘Meeting of the Geese’ off the frame and got it bound and finished. For extra credit, I made the backing piece wider with a strip of Batik that matches the Rock Pool quilt batik. Maybe, if I get all my prep work done today, I can put that on the frame. That’s a big maybe, I think Friday or Saturday might work better.

Be Kind

I finished my Santa hat quilt top yesterday. I had sewn the letter blocks the day before and sewed the rows together, but just couldn’t get to the last five rows of stitching. About half way through I realized I didn’t web the top, but that’s okay, it’s done. The blocks are supposed to be 10 ½ square. Since I didn’t do paper foundation piecing, mine were a few different sizes. I rounded them all down to 10 1/4 inches square. They look pretty cute, I think I’m going to use a string light panto that I have.

• 

• 

One of the first paper pantographs I bought when I first got my long arm, was Christmas lights on a string. I thought it would be cute for a few Christmas quilts I was doing, ha, not quite as easy as it looked. The bulbs turned out really wonky, the socket parts didn’t line up with the bulbs, and the connecting wires didn’t really meander. I’m pretty sure I didn’t do more than one row of them, which was promptly removed. Now, with the Q-matic system, any design is possible, I just need to make sure there’re enough hours in the day in which to quilt it.

After getting that top together, I started on the November edition of the BOM Botanica. Lots of flying geese, 72 of them, practically a flock. I’m excited to see this quilt done, next month is the final border.

This months blocks make up the chevron and dark blue border, and the thinner light green one with the geese around the corners. This quilt is actually a medallion layout, but the way its broken up into blocks makes it easier to piece. It’s sort of a puzzle like approach to piecing the top.

I really want to finish the quilting on the teddy bear quilt. I have two more rows on that one, but I need to “hover quilt” it. Which means standing over it and make sure none of the stitching goes over the appliqués, and deal with the stops and starts. The first few rows went well. The other hard part of that job is psyching myself up to go into the room. The heating system in there is ancient, and I am having a mini-split put in Monday (Yay!). Until then it is a bit chilly in there, usually around 55 degrees. I have a mini electric heater in there, but I feel like I have to stand in front of it to get warmed up. Good thing I have a few sweaters around I can wear.

Be Kind

Yesterday, was a work day for me. I got a lot done in the sewing room and three loads of laundry. I finished the Medallion quilt Sunday afternoon and there was enough backing and batting left on the frame to add another baby quilt. I used 108 wide backing with the selvedges pinned to the leaders, so the medallion was only 60 inches square, which left about 45 inches of backing. I’m not sure if this is going to stay a square or be a round quilt, so I can’t bind it yet.

I quilted the second Irish chain baby quilt with the sleepy bear pantograph I want to use on the appliquéd Irish chain quilt.

Plus there was enough room to add on this little square of extra blocks, for a pillow top. I was even able to bind the ICQ to push it into the finished column.

After dinner last night, I worked on ten more Santa hats for that quilt. I had all the pieces cut, so they went together pretty quickly. Just keep sewing.

The only project I didn’t work on was the Nieve sweater. It had been languishing for the past few months, waiting for a sleeve. I re-started it a few weeks ago, now that its cool enough to have a sweater on ones lap. This pattern has you make most of the torso, then make the sleeves, then attach them to the top and knit the shoulders and neck line in the round. It results in raglan sleeves, which I like, and very few ends to weave in. Plus knitting in the round is much easier.

Today is a windy day, with rain expected in a few hours, officially a stay inside day. I should bake something, but the sourdough starter isn’t fed. I want to get the appliqué quilt on the frame and start that. It’s a little more involved with the computer, I need to mask the bears, so the stitching doesn’t go through them. It creates a lot of stops and starts, which translates to many snip thread/pull up bobbin thread actions. The bear panto is big enough that it won’t be too much trouble.

Be Kind

I got my monthly BOM installments yesterday, the Halloween Figs and the Botanica quilts. This months is the 11th month for Botanica. I’m excited to finish this one, as I have a whole set of pretty digital quilting designs for it from Wasatch designs. I used a similar set to quilt the Forest Floor (below also by Wing and a Prayer designs) and I really like the results and the quilt turned out beautifully.

I was thinking about the finishing of the Botanica top, when I got an email from the place I get the BOM from, Stitchin’ Heaven. They are starting a new Christmas BOM in December, called Holiday Snow Village. It’s an older pattern from Pat Bono, and it is appliqué. I think it’ll be an good way for me to pick up the hand stitching again. I really enjoyed making Pearl Pereira’s Baltimore Christmas and Halloween quilts. I think that I made them pre- blog, yeah, this photo is from 2012.

I think it’s a little plain looking in this photo, but lots of room for embellishments.

I worked all day Saturday to get the bears sewn on the Irish chain baby quilt. I used freezer paper templates and school glue. I used the glue to hold the fabric edges of the pieces to the paper. This proved to be a bit too sticky, as it wasn’t easy to get the papers out. I sewed them to the quilt with a zig zag, and hand embroidered the eyes and details with 2 strands of floss. The nose was a bit of a problem, too big to embroider and too small to machine stitch on. I resorted to hand appliqué, which looks good. After I finished the three bears, I realized it was a bit off balance and I made the fourth bear in the corner. That one I re-used the freezer templates and skipped the glue, just ironed the edges down and sewed them on. Now to finish the medallion quilt and get this baby quilt done.

Be Kind